ECA Resources

• EIA Standards »
• Manufacturers Warehouse »
• Upcoming Conferences »

Featured Materials

• Phoenix Contact »
• Murata Electronics »

EE Resources

Electronic Products »

The key information source on important developments in products and product technology for engineers and managers.

EEM »

The engineer's source for electronic components and their suppliers.

eeTechBriefs »

15-Minute on-demand multimedia web casts covering the latest product developments.

IC Master »

Search over 100 Million parts matched to 1.2 Million data sheets. By part, product, or supplier.

Paper Title	Details	Get PDF
A Complete Physical Model for Gigabit Ethernet Optical Communication Systems
Impact of Transceiver Characteristics on the Performance of 10 GbE Links Applying OM-4 Multimode Fibers
Insertion Loss Performance Testing of 10 Gb/s Fiber Patch Cords for High-Speed Networks
Skew Testing for Parallel Optics Systems
Simulation of 10GbE Multimode Optical Communications Systems
Important Performance Characteristics of Enhanced OM3 Fibers for 10 Gb/s Operation
Utilizing Coagents in the Electron Beam Cure of Elastomers
Review of Estane? Flame Retardant TPU Compounds
The Goods on Fluoropolymers in Wire and Cable
Synergies of Metal Hydroxides and Metal Molybdates in Low-Smoke Flexible PVC
Advances in TPE Styrenic Block Copolymer Compounding for UL Flame Retardant Cable Applications
Tight-Buffer Drop Cable for FTTH Deployments
Development of Application-based Performance Standards for MDU Drop Cable
Multidwelling Unit Rugged Drop Cable Design: Bend-Insensitive Fiber and Bend-Insensitive Cable
Developments in Cabling and Connectivity for FTTH MDU Builds
New FTTH Cabling System for High-Rise/Medium-Rise MDUs
Options and Recommendations for Fiber Infrastructure in Buildings from a Network Provider Perspective
Electrical Optical Power Cable
Control Optical Cable
Development of Fatigue-Less Umbilical Cable for Full Ocean Depth 12000m
Super Armored Cable
Central Tube Cable Ribbon Coupling
Stainless Steel Tube Optical Cable Series Introduction
Maximizing Ultra-High Definition Video Cable
Electrical Losses in Coaxial Cable
Low Attenuation RF Cable
Design for 4 Pairs Category 6 Without a Central Filler or Cross-web
The Modeling of 4 Pair Data Grade Channels with the Aim to Use the Differential Mode Transmission Parameters which are Given in the Standardized Specification Requirements
Multi Port Cascaded Parameters in Comparison to Two Port Measurements
Integrated Optical Closure with Handle-Locking & Multi-Branching System for FTTx
Development of Drop Closure for Bundling 8-core Cables
New High Impact-Resistant Fusion Splicer
Development and Advance of Field Assembly Connector
Development of OTDR that Easily Locates a Fault in an Optical Drop Cable Below an Optical Splitter
OTDR Characteristics for PON Measurements
Application Area Expansion Technology of Optical Fiber Line Testing System
Combine Power and Opto Solutions for Telecom Networks
Low Wind Pressure Aerial Cable Research
Experiment and Analysis of Cable Sheath Effect on Cicada-Resistant Performance
High Voltage 3-core Cable with Integrated Duct for Optic Cables
A Modified OPGW Cable to Account for Higher Temperature Capacity During Short Circuit and Lightning Events
Application of Generalized Scattering Matrices for the Modeling of Twisted-pair Cables
Return Loss Decay at High Frequencies
Electro-Magnetic Immunity and Emission Performance of 10G Base-T Cabling
Inter-modal Alien Crosstalk Mechanisms in Balanced Pair Media
Field Testing for 10 Gigabit Ethernet over Twisted-Pair Cabling
Development of Standards for Assessment of Fire Effluent Toxicity and their Application to Cable Installations
Investigation of Cracking Behavior of Halogen Free Flame Retardant Systems
Evaluation of Novel Thermoplastic Polyolefin in Model Non-Halogenated Flame Retardant Compounds
Highly Flexible Halogen Free and Flame Retardant Thermoplastic Cable Compounds Modified with EVM Polymers
Halogen Free and Flame Retardant Elastomeric Cable Compounds with Submicron Sized Fillers
Effect of Silane Grafting Level and Crosslink Structure on Properties of Moisture Crosslinkable Systems
Evolution of Crosslinks During Moisture Cure of Ethylene-vinylalkoxysilane Copolymers in Power Cables
Protected Microducts, Overview and Current Trends
Permanent Access Cables for Low Cost FTTH Deployment
Development of the High Fiber Density Dry Microduct Cable
Optimization of Installation Performance for Loose Tube Microduct Cables by Using Design of Experiments and Full Scale Tests
New Design of Aerial Distribution Cable and Accessories for Cost-reduction of FTTH Deployment
Latest Developments on High Fiber Count Cables for Metro/Access Networks Dedicated to FTTH Applications
Reliability Considerations for Mid-Span Access Points in FTTH Optical Fiber Systems: Cable Termination and Expressed Buffer Tube Storage
Pre-connectorized Ultra-High-Density Optical Fiber Cable with Small Pulling Cable End and Adjustable Excess Length Part
Improved Heat Resistant UV Cure Compositions For Optical Fiber Applications
Optical Fibre Spinning Measurement at the Top of the Draw Tower
Investigations on Applicability and Reliability of Acrylate and Silicone Based Low Index Optical Fiber Coatings
Optical Fiber Strip Force Measurement Techniques and Their Implications
Energy Savings and Higher Outputs for Cable Compounds with the Newest Buss Kneader Technology
A Novel VAD Process
Electrical Conductivity of Typical Automotive Engine Compartment Fluids and A Method for Determining Their Effects When Inadvertently Present in Electrical Connectors of Powertrain Control Modules
New Passive Optical Attenuators to Provide Network Protection, Power Level Control and Fixed Attenuation
Fiber Optic Connector 3D Metrology: Theory and Practical Application
Recent Developments in the Design and Optimization of Constant Force Electrical Contacts
Characterization of the Effective Cut-off Wavelength of Commercially Available Single-mode Bend-insensitive Fibers for FTTX Applications
Investigation of Bend Loss Performance of Standard G.652D Fibres Relative to the ITU-T Bend Loss Requirements in Optical Access Networks
Lifetime Predictions of Bend Optimized GGP Single Mode Fiber for FTTH Requirements
Reliability Considerations for Next-Generation Bend-optimized Fibers
Microbending-Resistant Fiber
Different Implementations of G.657B Bend-Insensitive Single-Mode Fibers with Ultra-Low Bend Losses, Still Compatible to G.652D
Robust Compact Cables for Multifiber Connectivity Applications
Topology Modeling and Field Comparison Over a PON Based FTTH Deployment
Factory Splicing Fibers in Metal Tubes (FIMT)
The Design of Plastic Bobbin winding a Category 6A UTP Cable to Improve Impact Performance using CAE
Strain Transfer Capability of Strain Sensing Optical Fiber Cable and Its Measurement Method
Coloring Process Optimized for FTTX Specific Application Fiber
Development of Cicada-Proof Optical Fiber Drop Cable with Polyurethane Jacket
Position Stability of Surface Laid Submarine Optical Fiber Cables
Development of the Optical Fiber Cable for Recycling
Novel Optical Cross-connect Cabinet in ADSL Broadband Service
Small Diameter Fibers for Optical Interconnection and Their Reliability
Ink Attribute on Microbend Performance of G.655 Fiber
The Mechanical Properties of Primary Coatings for Minimizing PMD in Optical Fiber
Development a New Polymer Clad Coating Having a High Modulus and Fast Cure Speed
Sectionalized OPGW on Extra High Voltage Transmission Lines
Development of Low-count Aerial Optical Fiber Cable for Mid-span Branching Without Special Tools
Cable Designs for Emergency Repair Containing G.657 Fibers